The Baby Brezza Steriliser Dryer Advanced boils water to produce steam (100C) to naturally sterilise your baby products, then dries contents with hot air (55C).

We recommend using distilled water to avoid any mineral scale build-up. However, you can also use tap water or spring water, but more frequent cleaning of the heating plate will be required.

Because the Baby Brezza Steriliser Dryer Advanced dries contents with each cycle, you will need to add 120ml of water before each use.

Before placing items in the appliance for sterilisation it is important that all bottles, pump parts and accessories must be empty, clean & fully rinsed before use in this steriliser dryer.

Simply use a soft damp cloth to clean the base and control console, and clean the lid, accessory rack in hot soapy water. We do not recommend the use abrasives or solvents for cleaning as they may damage the appliance and the surface of the heating plate. If you are struggling to clean the heating plate it may need to be descaled.

It is recommended to do a very simple weekly descale of the heating plate. This is because mineral residue within tap water, particularly
in hard water areas, may deposit on the heating plate after the sterilisation cycle.

To avoid scale build up, simply wipe the surfaces with a soft moist cloth after each operation. If you can see mineral deposits, these can be removed with descaling solution or by leaving 60ml/2oz white vinegar on the heating plate for approximately 30 minutes. The plate should then be rinsed and wiped with a clean, dry cloth.