Fitting Guide
Step 1. Getting Started
Place the HandySitt face down. Turn both arm bolts one turn anti-clockwise to release arms, allowing them to slide freely.
Place the HandySitt face down. Turn both arm bolts one turn anti-clockwise to release arms, allowing them to slide freely.
Step 2. Positioning on the chair
Hook the HandySitt arms over the back of the chair and position the HandySitt so it is centred on the chair.
Hook the HandySitt arms over the back of the chair and position the HandySitt so it is centred on the chair.
Step 3. Pushing the seat down
Push the seat down until seat straps are taut.
Push the seat down until seat straps are taut.
Step 4. Adjusting to the chair
Slide the HandySitt forward until the HandySitt's seat is level. Ensure that the feet are flat on the chair base. Then tighten both arm bolts clockwise to lock arms in position.
Slide the HandySitt forward until the HandySitt's seat is level. Ensure that the feet are flat on the chair base. Then tighten both arm bolts clockwise to lock arms in position.
Step 5. Securing onto the chair
To fasten the HandySitt to the chair, pass the mounting strap under the chair and clip into buckle. Pull the loose end of the strap until the mounting strap is taut.
To fasten the HandySitt to the chair, pass the mounting strap under the chair and clip into buckle. Pull the loose end of the strap until the mounting strap is taut.
The minui HandySitt® (the portable part of your minui HandySitt high chair) fits a wide range of chairs with a back height between 30-45cm and a back width greater than 34cm. It has been designed to securely attach to round-backed, square-backed and ladder-backed chairs.
Because of the HandySitt design, it will securely attach to most styles of chair, even round backed chairs. If you have chairs with high backs (over 45cm), or narrow backs (smaller than 34cm), very thickly upholstered backs (wider than 5cm), or chairs with no back legs, please email customer services on info@cheekyrascals.co.uk for further information.
